Product name : CPVC fitting mould male adaptor with brass insert
CPVC male adaptor with brass insert fitting mould
Our main products:
CPVC pipe fitting mould (from 1/2” to 2”)
Taizhou Huangyan Huida Plastic Machinery Co.,Ltd was established in 1989.We have been devoting to the pipe fitting mould’s design and manufacture for more than 29 years.We have particular experience in producing customized plastic pipe fittings.Including sanitary and drainage system,potable water supply,roof drains.irragation,and gas supply with material of PVC,PPR,PP,HDPE,ABS,PPSU etc.Therefore,we have won the trust from over 200 customers in more than 60 countries around the world.
The collapsible core demoulding system consists of core and cavity,which are the main part in the mould structure,which is characterized by the following: the fixed bar is in the main core,outside which is the sliding rail.In the sliding cavity there is the active cavity and in the active cavity the stiffening rib is installed next to the fixed bar.In the middle of the stiffening rib there is the locating slot,and outside is the belling core.The belling core is consisted of the large sliding block and the small one,which work with clamping plate.Between the large and small sliding block,there are two active slots.One is connected with the lower surface of the locating slot ,in the middle of which a pad is installed, and a baffle plate is located.A support plate of small sliding block is installed between active slot and the slot of stiffening rib,above which is the support plate of the large sliding block.The large one has the other baffle plate, and they are connected with each other, the top of the baffle plate is connected with draw bar,and the deaw bar is driven by the hydro-cylinder.
Certifications & Awards
With more than 20-year-experience specialty design, continuous exploration and summaries of moulds manufacture, Huida has been the topping mould manufacturer in China and has achieved a great number of certifiactions and awards.