Huida is a mould manufacturer in China . Have more than 29 years experience to
plastic injection molds. We adopt CAD/CAM/CAE to design all the molds, combine
our plastic injection products mould of coupling reducer technology machine equipment and strict quality management to produce.
pvc electrical conduit moulding step
1 We can degin the mould according your products or 3D drawing.
2 Mould steel:P20#,718#,2316# steel and so on,or as per customer`s request.
3 Tooling lead times:20---40days.
4 Plastic mould trial samples sent to clinets to get their confirm and to see if there is any modification before mass production.
5 Arrange mass production at once and finish the production before the leadtime.
pvc electrical conduit moulding General Design
1.1 The mold(s) should always have interlocks for both cavities and cores.
1.2 The mold(s) shall be generally provided with venting facilities. These venting facilities shall be provided at the end of the flow way and near to flow lines.
1.3 The mold(s) should be equipped with feed for its handing. When it is not possible to put feet, use a stand for supporting the mold and storage.
1.4 The eyebolt thread in the mold(s) should be made in such a manner that the suspension remains in balance (Equidistant from the center of mass)
1.5 In the base plates (Upper and Lower) there should be four holes with threads with the same dimensions as the eyebolt.
1.6 Make undercuts in the corners between the plates to make easy the disassembly of the mold, between all the plates (lift-off corners)
1.7 Incorporate lubricating sliding plates
pvc electrical conduit moulding Information Necessary for Quotation
This may help us to come up with better mould solution.
This can help us to propose most suitable mould material
and injection gate.
or 3D File
Quotation can be made based on samples, pictures with
dimensions, 3D design or 2D detailed drawings.
(monthly, daily) quantity to be produced will help
us to figure out most suitable mold material and cavity numbers
to achieve best output with least cost.
Machine Tonnage or Production Capacity
This can help us to work out cavity quantity accordingly.
Mold Parts Brand
Please keep us informed of specific requirement on mould
components If any. (Eg. Preferable brand for hot runner,
hydraulic cylinder and so on.)